LN7 L4-098 1.6L VIN 4 2-bbl (1982)
Figure 4
9.
Attach input shaft and valve body puller (Tool T81P-3504-T or equivalent) to input shaft (Figure 4). Turn nut to remove valve assembly. Input
shaft seal and bearing will come out with the valve body.
Figure 5
10.
To remove the lower pinion shaft oil seal, insert protective sleeve (Tool T81P-3504-E or equivalent) along with T78P-3504-E or equivalent into
the gear housing. Tap the tool with a plastic mallet to bottom it (Figure 5).