LN7 L4-98 1.6L SOHC VIN 4 2-bbl HP (1983)
Removing bearing cage and race from outer joint
Fig. 24 Aligning inner cage and bearing race
Aligning inner cage and bearing race
Fig. 7 Inner Race Removal & Installation
Removing inner race from bearing cage
Fig. 15 Counterbore Positioning: Ball Groove & Window Alignment
Counterbore positioning, ball groove & window alignment
OUTER JOINT
Different bearing cages are used on the outer joints. One type contains four equal sized windows and two elongated windows while the other type
contains six windows of equal size, Fig. 21.
1.
Position stub shaft in suitable vise with bearing facing upward.
2.
Press downward on inner race until bearing can be removed, Fig. 22. Remove all six bearings in this manner.