Lynx L4-98 1.6L SOHC VIN 2 2-bbl (1983)
Seals and Gaskets: Technical Service Bulletins
A/T - ATX - Revised Converter Hub Seal/Service
Article No. 86-2-17
TRANSMISSION - AUTOMATIC TRANSAXLE - ATX - REVISED CONVERTER HUB SEAL DESIGN/SERVICE PROCEDURE
FORD 1981-86 ESCORT; 1982-86 EXP; 1984-86 TEMPO
LINCOLN-MERCURY 1981-86 LYNX; 1982-83 LN7; 1984-86 TOPAZ
Installation of the converter hub seal (E3FZ-7F401-A) required application of a sealant around the outer diameter and flange of the seal as described in
TSB 85-20-5 dated October 10, 1985. A new improved converter hub seal (E6FZ-7F401-A) is now available for the subject vehicles that will no longer
require dealer application of a sealant. This new seal supersedes the previous design and has its outer diameter coated with a factory applied red sealant
which will distinguish it from the old seal that is colored gray.
The new seal (E6FZ-7F401-A) is now available as a single item and is being phased into seal kit production. Therefore, whenever using an overhaul kit
(E2FZ- 7C391-B), or a seal kit (E2FZ-7153-B), from dealer stock, it is recommended that the gray converter hub seal provided in the kit should be
discarded and replaced with the new red converter hub seal (E6FZ- 7F401-A) until all kits have been updated.
PART NUMBER
PART NAME
CLASS
E6FZ-7F401-A
Converter Hub Seal
A
OTHER APPLICABLE ARTICLES: Supersedes 85-20-5
WARRANTY STATUS: "INFORMATION ONLY"