Mariner 2WD L4-2.3L VIN H Hybrid (2006)
4. Install the A/C clutch field coil.
1
Install the A/C clutch field coil.
2
Install the thermal limiter.
3
Tighten the bolt to 6 Nm (53 lb-in).
5. NOTE: The A/C compressor pulley is a tight fit on the A/C compressor. It must be correctly aligned during installation.
Install the A/C compressor pulley.
1
Install the special tool.
2
Install the A/C compressor pulley.
6. Install the A/C compressor pulley snap ring with the bevel side out.
7. Place one nominal thickness A/C clutch disc and hub spacer inside the clutch hub spline opening.
8. Install the A/C clutch disc and hub.
9. Using the special tool, install the A/C compressor clutch disc and hub nut.
1
Hold the A/C clutch disc and hub with the special tool.
2
Tighten the nut to 26 Nm (19 lb-ft).