Mariner 2WD L4-2.3L VIN H Hybrid (2006)
Transmission Mount: Service and Repair
Transmission Insulator and Retainer - Lower
Transmission Insulator and Retainer - Lower
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Turn the ignition to the OFF position.
3. Remove the splash shield retainers and remove the LH splash shield.
4. Remove the bolts and the lateral support crossmember.
^
To install, tighten to 115 Nm (85 lb-ft).
5. Remove the front insulator through bolt.
^
To install, tighten to 115 Nm (85 lb-ft).