mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Fuel Supply Line|Service and Repair|Page 3409 > < Fuel Supply Line|Service and Repair|Page 3407
Page 4
background image

Removal

WARNING:
-

Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related component. Highly flammable
mixtures are always present and may be ignited, resulting in possible personal injury.

-

The evaporative emissions system contains fuel vapor and condensed fuel vapor. Although not present in large quantities, it still presents
the danger of explosion or fire. Disconnect the battery ground cable from the battery to minimize the possibility of an electrical spark
occurring, and possibly causing a fire or explosion if fuel vapor or liquid fuel are present in the area. Failure to follow these instructions
can result in personal injury.

-

Fuel in the fuel system remains under high pressure, even when the engine is not running. Before repairing or disconnecting any of the
fuel system components, the fuel system pressure must be relieved to prevent accidental spraying of fuel, causing personal injury or a fire
hazard.

1. With the vehicle in NEUTRAL, position it on a hoist.
2. Release the fuel system pressure.
3. Disconnect the battery ground cable.

4. CAUTION:  When reusing liquid or vapor tube connectors, make sure to use compressed air to remove any foreign material from the

connector retaining clip area before separating the tube.

Fuel Supply Line|Service and Repair|Page 3409 > < Fuel Supply Line|Service and Repair|Page 3407