mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Transmission and Drivetrain > < Engine Controls - Long Crank/Hard Start
Page 1
background image

PROM - Programmable Read Only Memory: Customer Interest
Engine Controls - Long Crank/Hard Start

TSB 05-26-1

12/31/05

LONG CRANK/HARD START - 3.0L

FORD:
2005-2006 Escape

MERCURY:
2005-2006 Mariner

ISSUE
Some 2005-2006 Escape and Mariner 3.0L vehicles built from 7/19/2004 through 12/5/2005 may exhibit a long crank/hard start under either cold or hot
engine conditions.

ACTION
Reprogram the powertrain control module (PCM) using WDS release B40.4 and higher or B41 .1 and higher. This new calibration is not included in the
B41 CD. Calibration files may also be obtained at the website.

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage

OPERATION

DESCRIPTION

TIME

052601A

2005-2006 Escape/Mariner

0.4 Hr.

3.0L Engine: Check For
Diagnostic Trouble Codes
And Reprogram The
Powertrain Control Module
(Do not use with 12650D,
12650D84)

DEALER CODING

CONDITION

BASIC PART NO.

CODE

RECALEM

04

Disclaimer

Transmission and Drivetrain > < Engine Controls - Long Crank/Hard Start