Mariner 2WD L4-2.5L (2009)
free end of the hose in a container partially filled with clean, specified brake fluid.
2. Have an assistant pump the brake pedal at least 2 times and then hold firm pressure on the brake pedal.
3. Loosen the bleeder screw until a stream of brake fluid comes out. While the assistant maintains pressure on the brake pedal, tighten the bleeder
screw.
-
Repeat until clear, bubble-free fluid comes out.
-
Refill the brake master cylinder reservoir as necessary.
4. Tighten the bleeder screw to specifications. Refer to Specifications. Remove the rubber hose and install the bleeder screw cap.
5. Apply brakes several times to verify correct brake operation.