Mariner 2WD L4-2.5L (2009)
Thermostat Bypass Hose: Service and Repair
Bypass Tube - 2.5L
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Drain the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding See: Service and Repair.
3. Remove the intake manifold.
4. Disconnect and remove the coolant bypass tube.
5. To install, reverse the removal procedure.
6. Fill and bleed the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding See: Service and Repair.