mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

All Other Service Bulletins for PROM - Programmable Read Only Memory:|08-21-2 > < Engine, A/T Controls - Harsh Upshifts/Downshifts
Page 1
background image

PROM - Programmable Read Only Memory: All Technical Service Bulletins
Engine Controls - Rough Idle In DRIVE

TSB 09-6-2

04/06/09

2.5L WITH AUTOMATIC TRANSMISSION - ROUGH 
IDLE IN DRIVE - COLD ENGINE

FORD:
2009 Escape

MERCURY:
2009 Mariner

ISSUE
Some 2009 Escape and Mariner vehicles built before 3/5/2009 equipped with 2.5 liter engine and 6 speed automatic transmission may exhibit a rough
idle. Concern typically occurs when the engine is cold, under load (such as A/C on) and in drive. All ignition and fuel system testing pass and there are
no DTCs.

ACTION
Follow the Service Procedure steps to correct the condition.

SERVICE PROCEDURE

1. Reprogram the powertrain control module (PCM) to the latest calibration using IDS release 59.8 and higher or 60.01 and higher. Calibration files

may also be obtained at the website.

2. Perform the powertrain mount neutralization procedure in the Workshop Manual, Section 303-00.

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage 
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.

OPERATION

DESCRIPTION

TIME

090602A

2009 Escape, Mariner 2.5L

0.7 Hr.

Automatic Transmission:
Reprogram The PCM,
Includes Time To
Neutralize Powertrain
Mounts (Do Not Use With
12650D)

DEALER CODING

CONDITION

BASIC PART NO.

CODE

RECAL

04

Disclaimer

All Other Service Bulletins for PROM - Programmable Read Only Memory:|08-21-2 > < Engine, A/T Controls - Harsh Upshifts/Downshifts