Mariner 2WD V6-3.0L (2008)
![background image](/mercury/mariner_2wd/v6-3.0l/Page-2078006.png)
11. Remove the 2 engine support crossmember bolts.
-
To install, tighten to 90 Nm (66 lb-ft).
Hybrid vehicles only
12. Remove the 2 bolts from the lower transmission insulator and retainer bracket.
All vehicles
13. Remove the nut and the engine support crossmember. Discard the nut.
-
To install, tighten to 175 Nm (129 lb-ft).
All vehicles except hybrid
14. Remove the rear transaxle support isolator through bolt.