Mariner 2WD V6-3.0L (2008)
7. WARNING: Check the seat side air bag deployment chute for damage. The deployment chute must not be repaired. If there is any
damage to the deployment chute, a new seat back trim cover and deployment chute must be installed as a unit. Failure to follow these
instructions may result in the seat side air bag module deploying incorrectly and increase the risk of serious personal injury or death in a
crash.
Feed the side air bag deployment chute and clips back through the opening in the backrest foam pad.
8. WARNING: If the seat side air bag module deployment chute is not correctly positioned and closed, the seat side air bag module may not
deploy correctly. Failure to follow these instructions may result in the seat side air bag module deploying incorrectly and increases the
risk of serious personal injury or death in a crash.
Install the side air bag module deployment chute and J-clips around the side air bag module and seat backrest frame.
9. Roll the trim cover down the backrest and fasten the hook-and-loop strips.
10. Fasten the backrest J-clip.
Seats with lumbar adjust
11. Install the lumbar control knob.
All seats
12. Install the seat backrest.
13. Install the seat.
Seat Backrest - Rear
SEAT BACKREST - REAR