Mariner 2WD V6-3.0L (2008)
9. Remove the center support bolt.
^
To install, tighten to 10 Nm (89 lb-in).
2.3L vehicles only
10. Disconnect the cooling fan resistor electrical connector.
11. Disconnect the coolant recovery hose from the radiator and position it aside.
3.0L vehicles only
12. Detach the lower degas bottle hose from the cooling fan motor and shroud.
All vehicles
13. Disconnect the cooling fan electrical connectors.
14. Remove the 2 cooling fan bolts and the cooling fan motor and shroud.
^
To install, tighten to 8 Nm (71 lb-in).
15. To install, reverse the removal procedure.
2.3L vehicles only
16. Fill and bleed the cooling system.