Mariner 2WD V6-3.0L (2008)
14. From under the rear of the passenger seat, slide and disengage the passenger seat side air bag module electrical connector locking clip, and then
release the tab and disconnect the passenger seat side air bag module electrical connector.
15. Remove the passenger side D-pillar trim panel.
1
Separate the weatherstrip.
2
Pull out and separate the quarter trim panel at the D-pillar trim panel.
3
Pull out to release the retainers and remove the D-pillar trim panel.
16. Disconnect the passenger side safety canopy module electrical connector.
17. Remove the driver side D-pillar trim panel.
1
Separate the weatherstrip.
2
Pull out and separate the quarter trim panel at the D-pillar trim panel.
3
Pull out to release the retainers and remove the D-pillar trim panel.