Mariner 2WD V6-3.0L (2008)
Daytime Running Lamp: Pinpoint Tests
PINPOINT TEST AB: THE DAYTIME RUNNING LAMPS (DRL) ARE INOPERATIVE
Normal Operation
When the ignition switch is in the RUN position, the headlamps are not on (from the autolamp system or manual control from the headlamp switch),
the transaxle is not in PARK (P) (automatic transaxle) or the parking brake is not applied (manual transaxle), the smart junction switch (SJB) provides
a pulse-width modulated (PWM) voltage to the low beam headlamps. This illuminates the headlamps at a reduced intensity.
This pinpoint test is intended to diagnose the following:
-
Exterior lighting system input/output
-
Ignition switch input
-
Transaxle gear input (automatic transaxle)
-
Parking brake switch input (manual transaxle)
-
SJB
AB1-AB3
AB4-AB6