Mariner 2WD V6-3.0L (2008)
Shift Indicator: Adjustments
Selector Lever Cable Adjustment
1. Place the floor shift selector lever in the (D) position.
2. Disconnect the selector lever cable end from the manual lever.
3. Place the manual lever in the (D) position.
1
Rotate the manual lever counterclockwise to the PARK position.
2
Rotate the manual lever clockwise 3 detents to the (D) position.
4. Release the selector lever cable adjuster lock.
1
Pull out on the adjuster lock tabs.
2
Slide the lock over to unlock the selector lever cable.