Mariner 2WD V6-3.0L (2008)
7. Remove the 2 bolts from the mount and remove the mount.
Installation
1. Install a new mount onto the cross brace and install the bolts.
^
Tighten to 115 Nm (85 lb-ft).
2. Position the cross brace in place and install the nut.
^
Tighten to 175 Nm (129 lb-ft).
3. Install the 2 bolts for the cross brace.
^
Tighten to 90 Nm (66 lb-ft).
4. Install the through bolt for the mount.
^
Tighten to 120 Nm (89 lb-ft).
5. Install the cross brace and the 4 bolts.
^
Tighten to 115 Nm (85 lb-ft).