Mariner 2WD V6-3.0L VIN 1 (2006)
Lateral Accelerometer: Service and Repair
Accelerometer - Escape Hybrid
Accelerometer - Escape Hybrid
Removal and Installation
WARNING: The traction battery and charging system contain high voltage components and wiring. High voltage insulated safety gloves
and a face shield must be worn when carrying out any diagnostics on this vehicle. Failure to follow these instructions may result in severe
personal injury or death.
1. Disconnect the battery.
2. Depower the high voltage battery.
3. Remove the floor console.
4. NOTE: When installing the accelerometer the electrical connector must face the driver seat.
Disconnect the electrical connector.
5. Remove the 2 accelerometer nuts.
^
To install, tighten to 7 Nm (62 inch lbs.).
6. Remove the accelerometer.
7. To install, reverse the removal procedure.
