mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Seat Sensor/Switch > < Safety Belt Buckle and Pretensioner|Page 7288
Page 9
background image

9. Deploy the deployable steering column by touching the ends of the 2 wires of the jumper harness to the terminals of a 12-volt battery.

10. To allow for cooling, wait at least 10 minutes before approaching the deployed steering column.
11. Dispose of the deployed steering column in the same manner as any other part to be scrapped.

Seat Sensor/Switch > < Safety Belt Buckle and Pretensioner|Page 7288