Mariner 2WD V6-3.0L VIN 1 (2006)
Band Apply Servo: Service and Repair
Overdrive Servo
Special Tool(s)
Removal
1. NOTE: Servicing the intermediate/overdrive servo in the vehicle is only recommended in the event of a leak. If the servo has failed it will be
necessary to remove and disassemble the transaxle to inspect the intermediate/overdrive band assembly and direct clutch for damage.
With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the 7 retainers and the LH splash shield.
3. Remove the transmission fluid cooler line bracket and bolt and position it aside.
4. WARNING: The servo is under pressure. Servo and servo cover are under high spring force. Use caution when removing servo cover.