Mariner 4WD L4-2.3L VIN Z (2005)
Rear Door Exterior Handle: Service and Repair
Door Handle
EXTERIOR REAR DOOR HANDLE
Removal and Installation
Exterior Rear Door Handle
1. Remove the rear door trim panel.
2. Position the watershield aside.
3. Position the rear door glass top run aside.
1
Remove the 2 bolts.
-
To install, tighten to 8 Nm (71 lb-in).
2
Position the rear door glass top run aside.
4. Loosen the 2 exterior door handle reinforcement screws until the exterior door handle reinforcement slides free.
5. Remove the exterior door handle cover.
1
Pull the exterior door handle.
2
The front of the cover must be released prior to removing the cover.