Mariner 4WD L4-2.3L VIN Z (2005)
3. Through the RH access, disconnect the liftgate window glass electrical harness connector.
4. Disconnect the LH heated window grid wire electrical connector.
5. NOTE: An assistant may be needed to carry out this step.
Disconnect the 2 liftgate window glass cylinders.
1
Slide the spring retainer to the end of the socket.
2
Disconnect the socket from the ball stud.
6. NOTE: An assistant may be needed to carry out this step.
Remove the 2 liftgate window glass hinge nuts and the liftgate window glass.
-
To install, tighten to 7 Nm (62 lb-in).
7. To install, reverse the removal procedure.
-
Transfer components as necessary.