Mariner 4WD L4-2.3L VIN Z (2005)
6. Connect the passenger seat side air bag module electrical connector and then slide and engage the seat side air bag electrical connector locking
clip.
Vehicles with safety canopies
7. Remove the restraint system diagnostic tool from the vehicle harness side of the driver side safety canopy module electrical connector.
8. Connect the driver side safety canopy module electrical connector.
1
Connect the driver side safety canopy module electrical connector.
2
Slide and engage the driver side safety canopy module electrical connector locking clip.
9. Install the driver side D-pillar trim panel.
1
Engage the D-pillar trim panel to the quarter trim panel.
2
Install the D-pillar trim panel.
3
Install the weatherstrip.