Mariner 4WD L4-2.3L VIN Z (2005)
5. WARNING: If the air bag deployment chute is not properly positioned, the side air bag may not deploy properly.
Install the side air bag module deployment chute and J-clips around the side air bag module and seat backrest frame.
6. Install the hook and loop fastener around the seat backrest frame.
7. Roll the seat trim cover down in position and attach the hook and loop strips.
8. Feed the seat back trim cover rear J-clip through seat between the seat backrest and seat cushion.
9. Fully recline the seat backrest.
10. Attach the seat back trim cover J-clips.
11. Move seat backrest to the upright position.
Seats with manual lumbar adjust