Mariner 4WD L4-2.3L VIN Z (2005)
Transmission Cooler: Removal and Replacement
Auxiliary Transmission Fluid Cooler
Auxiliary Transmission Fluid Cooler
Material
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the front bumper cover.
3. Disconnect the transmission fluid cooler tube clamps and disconnect the rubber hoses from the auxiliary cooler.
4. Remove the bolts for the auxiliary and remove the cooler.
^
To install, tighten to 10 Nm (89 inch lbs.).
5. Fill the transaxle with clean automatic transmission fluid.
6. To install, reverse the removal procedure.
Cooler Bypass Valve
Cooler Bypass Valve