Mariner 4WD L4-2.3L VIN Z (2005)
1. Remove the halfshaft assembly.
2. To remove the seal only, use the special tool to remove the stub shaft seal.
3. To remove the bearing and seal, use the special tools to remove the stub shaft pilot bearing and seal.
Installation
1. NOTE: Lubricate the new stub shaft pilot bearing with rear axle lubricant.
To install the bearing, use the special tools and install the stub shaft pilot bearing.
2. NOTE: Lubricate the new stub shaft pilot bearing housing seal with grease.
Using the special tools, install the stub shaft pilot bearing housing seal.