mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

ABOUT US
Sensors and Switches - Transfer Case > < Transfer Case Rear Output Shaft Oil Seal|Page 4421

Mariner 4WD L4-2.3L VIN Z (2005)

Page 3
background image

4. Install a new dust shield.
5. Install the transfer case vent tube.

^

Install the 2 transfer case vent tube bolts.

^

Tighten to 30 Nm (22 ft. lbs.).

6. Install the transfer case.

Sensors and Switches - Transfer Case > < Transfer Case Rear Output Shaft Oil Seal|Page 4421