Mariner 4WD L4-2.5L (2010)
Bezel Requires Paint Use
B-Time)
092407C
2008-2010 Escape,
0.5 Hr.
Mariner: Inspect And
Replace One (1) Rear
Bezel. This Labor
Operation Can Be Claimed
With A Or B (If The New
Bezel Requires Paint Use
B-Time)
092407D
2008-2010 Escape,
0.8 Hr.
Mariner: Inspect And
Replace Two (2) Rear
Bezels. This Labor
Operation Can Be Claimed
With A Or B (If The New
Bezel Requires Paint Use
B-Time)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
7822404
30
Disclaimer
Technical Service Bulletin # 09-24-7
Date: 091214
Body - Exterior Door Handle(s) Hard T0 Open/Not Flush
TSB 09-24-7
12/14/09
EXTERIOR DOOR HANDLE DIFFICULT TO
OPEN/HANDLE NOT SITTING FLUSH WHEN
RELEASED/HANDLE STICKING WHEN OPENING
DOOR - BUILT ON OR BEFORE 9/1/2009
FORD:
2008-2010 Escape
MERCURY:
2008-2010 Mariner
ISSUE
Some 2008-2010 Escape and Mariner vehicles built on or before 9/1/2009 may exhibit an exterior door handle that is difficult to open, does not sit flush
when released, and/or sticks when opening door. This may be due to the exterior door handle plunger binding on the door handle bezel.
ACTION
Follow the service procedure to correct the condition.
SERVICE PROCEDURE
1. Remove the exterior door bezel on affected door(s) per Workshop Manual (WSM), Section 501-14.