Mariner 4WD L4-2.5L (2010)
Trunk / Liftgate Interior Trim Panel: Service and Repair
Liftgate Trim Panel
Removal and Installation
1. Open the liftgate.
2. Remove the 4 liftgate trim panel screws.
3. Release the 8 liftgate trim panel retaining clips.
4. NOTE: If equipped with a rear wiper, the rear glass must be open.
Remove the liftgate trim panel.
5. NOTICE: To avoid damage to the liftgate trim panel, remove any retaining clips from the body and attach to the liftgate trim panel
before installing.
To install, reverse the removal procedure.