Mariner 4WD L4-2.5L (2010)
Thermostat Bypass Hose: Service and Repair
Bypass Tube - 2.5L
Removal and Installation
1. Drain the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding See: Service and Repair.
2. Remove the intake manifold. For additional information, refer to Engine.
3. Disconnect and remove the coolant bypass tube.
4. To install, reverse the removal procedure.
5. Fill and bleed the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding See: Service and Repair.