Mariner 4WD L4-2.5L (2010)
9. Remove the 6 mm x 18 mm bolt.
10. Remove the Crankshaft TDC Timing Peg.
11. Install the upper front cover timing hole plug.
-
Tighten to 10 Nm (89 lb-in).
12. Apply silicone gasket and sealant to the threads of the lower front cover timing hole plug.
-
Install the plug and tighten to 12 Nm (106 lb-in).
13. Install the engine plug bolt.
-
Tighten to 20 Nm (177 lb-in).
14. Install the accessory drivebelt. For additional information, refer to Drive Belts, Mounts, Brackets and Accessories.
