Mariner 4WD L4-2.5L (2010)
![background image](/mercury/mariner_4wd/l4-2.5l/Page-730001.png)
Exhaust Manifold: Specifications
Install 7 new exhaust manifold studs in the cylinder head.
Tighten to....................................................................................................................................................................................................17 Nm (150 lb-in).
NOTE: Make sure to tighten the nuts in the sequence shown in 2 stages.
Position the exhaust manifold and tighten the 7 new exhaust manifold nuts in the sequence shown in 2 stages:
Stage 1: Tighten to.........................................................................................................................................................................................48 Nm (35 lb-ft).
Stage 2: Tighten to.........................................................................................................................................................................................48 Nm (35 lb-ft).
Install the exhaust manifold heat shield and the 4 bolts.
Tighten to......................................................................................................................................................................................................10 Nm (89 lb-in).