Mariner 4WD L4-2.5L (2010)
![background image](/mercury/mariner_4wd/l4-2.5l/Page-1877001.png)
Blower Motor Switch: Service and Repair
Blower Motor Speed Control
Removal and Installation
1. Lower the glove compartment.
2. Disconnect the blower motor speed control electrical connector.
3. Remove the 2 blower motor speed control screws.
-
To install, tighten to 3 Nm (27 lb-in).
4. Remove the blower motor speed control.
5. To install, reverse the removal procedure.