Mariner 4WD L4-2.5L (2010)
![background image](/mercury/mariner_4wd/l4-2.5l/Page-1167001.png)
Resonator: Service and Repair
Intake Air Resonator
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Remove the LF wheel and tire. For additional information, refer to Wheels and Tires.
3. Remove the 9 fasteners and position aside the LH fender splash shield.
4. Remove the bolt and the air intake resonator.
-
To install, tighten to 8 Nm (71 lb-in).
5. NOTE: Make sure that the front rubber grommet is seated in the bracket.
To install, reverse the removal procedure.