mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Transmission and Drivetrain > < A/T Control - Harsh Shift/Upshift Flare/Harsh Engagement
Page 1
background image

PROM - Programmable Read Only Memory: All Technical Service Bulletins
Engine, A/T Controls - MIL/Stuck In 5th Gear/DTC's Set

TSB 10-12-12

07/05/10

6F35 TRANSMISSION - 5TH GEAR ONLY - AFTER
USING GRADE ASSIST ON STEEP DOWNGRADE- 
DTC GROUPING P072F, P073A, P073B OR P07A8,
P07A9, P07AA, P0731, P0732

FORD:
2010 Fusion
2009-2010 Escape

MERCURY:
2010 Milan
2009-2010 Mariner

ISSUE
Some 2009-2010 Escape, Mariner, 2010 Fusion and Milan vehicles equipped with an automatic transmission may exhibit a malfunction indicator light
(MIL) on and 5th gear drive away (Transmission Failsafe) after using the Grade Assist option on a steep downgrade and have a group of diagnostic
trouble codes (DTCs) P072F, P073A, P073B or P07A8, P07A9, PO7AA, P0731, P0732.

ACTION
Reprogram the powertrain control module (PCM) to the latest calibration using Integrated Diagnostic System (IDS) release 67.03 and higher. This new
calibration is not included in the VCM 2010.5 DVD. Calibration files may also be obtained at the website.

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage 
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.

OPERATION

DESCRIPTION

TIME

101212A

2009-2010 Escape,

0.3 Hr.

Mariner 2010 Fusion,
Milan: Check For DTCs
And Reprogram Them
PCM (Do Not Use With
Any Other Labor
Operations)

DEALER CODING

CONDITION

BASIC PART NO.

CODE

RECALEM

04

Disclaimer

Transmission and Drivetrain > < A/T Control - Harsh Shift/Upshift Flare/Harsh Engagement