Mariner 4WD L4-2.5L (2010)
Install the center support with the long center support legs facing down and the feed holes aligned with the feed holes in the transaxle case. See
Figure 66.
1. Long center support legs face down.
2. Feed holes face the front of the transaxle case.
30. Install the No. 5 and No. 6 thrust bearings. See Figure 67.
1. No. 5 thrust bearing
2. No. 6 thrust bearing
31. Install the center planetary sun gear. See Figure 68.
32. Install the center planetary carrier/front ring gear assembly. See Figure 68.