Mariner 4WD L4-2.5L (2010)
16. Install 2 new seals on the O/D (4, 5, 6) clutch piston and lubricate the seals with petroleum jelly. See Figure 40.
17. Install a new O/D (4, 5, 6) clutch piston inner seal and lubricate the seal with petroleum jelly. See Figure 41.
18. Position the O/D (4, 5, 6) clutch piston in place.
19. Using the Overdrive Clutch, Balance Piston, and Direct Clutch Compressor # 30758911,install the O/D (4, 5, 6) clutch piston into the O/D/direct
clutch assembly by hand. See Figure 42.
20. NOTE: Position the O/D (4, 5, 6) clutch piston return spring with the holes facing upward Install the O/D (4, 5, 6) clutch piston return spring.