Mariner 4WD L4-2.5L (2010)
14. Remove the solenoid retaining pin(s).
15. Remove the solenoid(s) from the solenoid body.
Installation
1. Inspect the solenoid(s) for damage.
2. If a new solenoid is not being installed, install the solenoid(s) into the bore from which it was removed.
3. If installing a new Variable Force Solenoid (VFS), determine the base part number of the solenoid(s). The Torque Converter Clutch (TCC)
solenoid, Shift Solenoid A (SSA) and Shift Solenoid C (SSC) are all normally low pressure solenoids. The Line Pressure Control (LPC) solenoid,
Shift Solenoid B (SSB) and Shift Solenoid D (SSD) are all normally high pressure solenoids. Shift Solenoid E (SSE) is not a VFS; it is an
ON/OFF solenoid.