Mariner 4WD L4-2.5L (2010)
16. Disconnect the clip retainer from the left front of the engine.
17. Remove the body ground terminal bolt from the left fenderwell.
-
To install, tighten to 12 Nm (106 lb-in).
18. Open the Battery Junction Box (BJB) cover and remove the BJB terminal nut.
-
To install, tighten to 10 Nm (89 lb-in).
19. Position the BJB terminal aside.
20. Disconnect the BJB electrical connector.
21. Disconnect the retainers fastening the battery cables to the battery tray.
22. Remove the battery cables.
23. To install, reverse the removal procedure.