Mariner 4WD L4-2.5L (2010)
4. Remove the helical driven gear, idler gear and drive gear.
5. Using the PTU Linkshaft Seal Dust Shield Installer and Handle, remove the input shaft seal.
6. Clean the PTU sealing surface.
Intermediate Shaft Seal
Intermediate Shaft Seal
1. Remove the Power Transfer Unit (PTU). For additional information, refer to Power Transfer Unit (PTU) See: Service and Repair/Removal and
Replacement/Transfer Case - Power Transfer Unit (PTU) - Removal.
2. Using the Halfshaft Oil Seal Remover and Slide Hammer, remove the intermediate shaft seal.
