Mariner 4WD L4-2.5L (2010)
13. NOTICE: Make sure that when installing the manual control lever it is fully seated onto the manual control lever shaft or damage to the
manual control lever shaft will occur and the lever will come loose.
NOTICE: Make sure to hold the manual control lever while tightening the manual control lever nut or damage to the manual control
lever and park components will occur.
Install the manual control lever and the nut.
-
Tighten to 24 Nm (18 lb-ft).
14. Connect the selector lever cable end to the manual control lever with the manual control lever and selector lever in DRIVE. Check selector lever
cable adjustment. For additional information, refer to Automatic Transmission/Transaxle.
3.0L engine
15. Connect the lower radiator hose onto the thermostat housing.
16. Connect the upper radiator hose onto the coolant pump housing.
All vehicles
17. Install the LH splash shield and the retainers.