Mariner 4WD L4-2.5L Hybrid (2009)
Seals and Gaskets: Service and Repair
Differential Seals - LH
Differential Seals - LH
Special Tools
Material
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Turn the ignition to the OFF position.
3. Remove the retainers and remove the LH splash shield.
4. Remove the drain plug and drain the fluid.
5. Remove the LH halfshaft.
6. Using the Slide Hammer and Input Shaft Oil Seal Remover, remove and discard the LH differential seal.
Installation
1. Using the Differential Seal RH and LH installer (two sided tool eCVT) and Handle, install the LH differential seal.