Mariner 4WD L4-2.5L Hybrid (2009)
Shift Cable: Adjustments
Selector Lever Cable Adjustment
1. NOTICE: The ignition must be in the OFF position to make sure that the Electronically Controlled Continuously Variable Transmission
(eCVT) and the engine are OFF.
With vehicle in NEUTRAL, position it on a hoist.
2. Place the selector lever in the D position.
3. Remove the retainers and the LH splash shield.
4. Remove the 2 bolts and the transaxle selector lever cable splash shield.
5. Remove the selector lever cable end from the manual control lever.
6. Place the manual control lever in DRIVE by positioning the manual control lever between the 2 ribs on the transaxle case.
7. Release the selector lever cable adjuster lock.
1. Pull out on the selector lever cable adjuster lock tabs.