Mariner 4WD V6-3.0L (2010)
6. Install the A/C compressor pulley snap ring with the bevel side out.
7. Place one nominal thickness A/C clutch disc and hub spacer inside the clutch hub spline opening.
8. Install the A/C clutch disc and hub.
9. Install the A/C compressor clutch disc and hub bolt.
1. Hold the A/C clutch disc and hub with a suitable spanner-type wrench.
2. Tighten the bolt to 20 Nm (177 lb-in).
10. Measure and adjust the clutch air gap by removing or adding A/C clutch disc and hub spacers.
11. Install the A/C compressor. For additional information, refer to Air Conditioning (A/C) Compressor - 2.5L See: Service and Repair or Air
Conditioning (A/C) Compressor - 3.0L (4V) See: Service and Repair.