Mariner 4WD V6-3.0L (2010)
![background image](/mercury/mariner_4wd/v6-3.0l/Page-1487004.png)
4. Remove the crossmember.
4. Remove the through bolt and the transaxle front support insulator.
-
To install, tighten to 115 Nm (85 lb-ft).
5. If necessary, remove the 3 bolts and the transaxle front support insulator bracket.
-
To install, tighten to 48 Nm (35 lb-ft).
6. To install, reverse the removal procedure.