mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Ignition Coil - Hard Starting Hot or Cold|Page 3313 > < Ignition Coil - Possible Damage From Antitheft Devices|Page 3308
Page 1
background image

Ignition Coil: Customer Interest
Ignition Coil - Hard Starting Hot or Cold

Article No. 84-23-5

HARD STARTING -2.3L OHC - HOT OR COLD

FORD 1984 LTD

LINCOLN-MERCURY 1984 MARQUIS

CALIBRATIONS: 2.3 OHC Canada only

A hard starting condition can be caused by an improperly wired connector at the ignition coil.

When a hard starting condition is experienced, the following steps should be taken to insure that the ignition coil wires are not crossed in the connector
before performing normal (hard starting) diagnostic procedures.

1.

Locate the ignition coil mounted under the hood on the front of the left hand shock tower.

Ignition Coil - Hard Starting Hot or Cold|Page 3313 > < Ignition Coil - Possible Damage From Antitheft Devices|Page 3308