Marquis L6-200 3.3L VIN X 1-bbl (1983)
Figure 1
3.
By hand, gently bend the trip reset shaft away from the edge of the inner lens, approximately 1/16 inch or as required to remove binding condition
(Figure 1).
NOTE:
Before reassembling lens and mask assembly, remove any fingerprints or dirt from the inner lens surfaces.
4.
Reposition lens and mask assembly to the cluster and check for adequate clearance of reset shaft to inner lens opening. Verify proper trip odometer
operation.
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: SP17255A83
TIME:
0.7 Hr. DLR. CODING: Basic Part No. 17255 Code: 41
