Marquis V6-232 3.8L VIN 3 TBI (1985)
Rocker Arm Assembly: Service and Repair
V6-232
These engines use stamped steel rocker arms retained by a fulcrum seat which bolts directly to the cylinder head and guides the rocker arm. Torque
fulcrum bolts in two steps as follows: For each valve rotate crankshaft until tappet rests on heel (base circle) of camshaft lobe and torque fulcrum bolt to
5-11 ft. lbs. After initial torquing all fulcrum bolts, final torque to 19-25 ft. lbs. Final torque may be done with camshaft in any position.