mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Dashboard / Instrument Panel|Service and Repair|Page 4071 > < Dashboard / Instrument Panel|Service and Repair
Page 2
background image

13.

Remove two left side trim panel outboard attaching screws.

14.

Remove inboard attaching screws, then left side trim panel.

Fig. 76  Removing Right Side Lower Trim Panel. Scorpio

Fig. 77  Removing Console Attaching Bolts. Scorpio

15.

Remove six attaching screws at top and side of right side lower trim panel, Fig. 76.

16.

Remove ash receptacle, and receptacle bin attaching screws.

17.

Rotate ash receptacle bin and remove.

18.

Remove console attaching screws from ash receptacle bin cavity, Fig. 77.

19.

Pull center finish trim from edge of radio, amplifier and ash receptacle.

20.

Remove lamp and cigar lighter electrical connectors from back of center finish trim.

Fig. 78  Auxiliary Fuse Panel. Scorpio

Dashboard / Instrument Panel|Service and Repair|Page 4071 > < Dashboard / Instrument Panel|Service and Repair