Merkur Xr4ti L4-140 2.3L SOHC Turbo (1985)
cap the other nipple with a 7/32" rubber cap (382443-S). Also block off the old nipple connections on the PCV tube connector with one or two
7/32" rubber caps depending on whether the vehicle is speed control or nonspeed control (see Figure 11).
38.
Refill cooling system.
39.
Reconnect the negative battery cable.
40.
Start engine and check for oil and coolant leaks.
41.
Run the engine for a few minutes and recheck coolant level.
PART NUMBER
PART NAME
CLASS
E6RY-6582-A
Valve Cover
C
E7AZ-6A892-A
Grommet
A
E6ZZ-6A785-A
Separator
C
E2ZZ-6584-A
Valve Cover Gasket
AG
E5TZ-9E936-B
Throttle Body Gasket
B
E3ZZ-9F703-A
Gasket - Turbo To Air
BM
Tube
E6SZ-9C674-A
Inlet Elbow -
BM
Turbocharger
E3ZZ-9D634-A
Inlet Elbow - Gasket
B
382443-S
Rubber Vacuum Cap
BS
D7AZ-19B508-A
Contact Adhesive
AM
OTHER APPLICABLE ARTICLES: 87-5-18
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual
OPERATION: SP871110A
TIME:
1.9 Hrs.
DLR. CODING: Basic Part No. 6A785 - Code: 40